Re: [Crash-utility] CONFIG_PROC_VMCORE_DEVICE_DUMP

Hi, Thank you for response. Do you have estimated time when you will implement a command to simplified this flow? It can help a lot! On the way, I ran into another problem - As I wrote, vmcore_add_device_dump API let me store device's data (reg’s/mem’s) into the vmcore file in dedicated "sections". Currently my goal is to be able to load a vmcore with crash-tool, and see the stored data of devices in “native” manner like if it was stored in RAM… That's mean, I want to be able to access memory in the device just as access memory in the RAM. I’m trying to find the proper way to let such memory exploration. Due to vmcore contains only RAM content, currently I consider to add these extra regions to memory-map of vmcore… Maybe I have to do that in two steps: 1. Extract the data - follow your explanation, and get a raw data for each of device. 2. Push it as a different section (MEMORY type) to the vmcore.

Is there a better way to do that? Suggestions?

Thanks, Tirtsah. -----Original Message----- From: crash-utility-bounces(a)redhat.com <crash-utility-bounces(a)redhat.com&gt; On Behalf Of Rahul Lakkireddy Sent: יום ד 27 מרץ 2019 17:59 To: Dave Anderson <anderson(a)redhat.com&gt; Cc: nirranjan(a)chelsio.com; indranil(a)chelsio.com; Discussion list for crash utility usage, maintenance and development <crash-utility(a)redhat.com&gt; Subject: Re: [Crash-utility] CONFIG_PROC_VMCORE_DEVICE_DUMP On Tuesday, March 03/26/19, 2019 at 20:07:09 +0530, Dave Anderson wrote: > > > ----- Original Message ----- > > > > > > Hi, > > I'm enabling core dump flow on my Linux, using Linux kexec > > mechanism. This flow ends with vmcore elf image reflecting the full > > memory situation at the crash moment. The vmcore driver in kernel > > that outputs the vmcore elf image has vmcore_add_device_dump API > > that's used for pushing some extra hardware memory sections into the ELF. > > > > However, After vmcore file is generated, I want to see this data, > > but don't know how to do that. I'm using crash-utility for the core > > analysis, so I wonder - maybe there is an option to see also this > > extra data using crash-utility? > > > > > > > > It’s very important to me, > > > > Thanks, > > > > Tirtsah. > > I found an old email thread (September 2018) from Rahul Lakkireddy > w/respect to his proposal to add a new "help" option to dump the contents > of the ELF note. > I have added his email to the cc: list. > > Rahul -- are you still planning to post a crash utility patch? > Yes, I still have plans to implement new command to simplify extracting the device dumps from vmcore using crash utility. Meanwhile, I've been using crash, xxd, and dd to extract vmcore device dumps. They are the first ELF notes immediately after the kdump sub header. 1. Get the offset_note, notes_buf, and the first NT_PRSTATUS starting offset (i.e. pr_status_notes[0]). # crash vmlinux vmcore crash> help -D [...] offset_note: 4200 (0x1068) size_note: 67121852 (0x40032bc) notes_buf: 7f77e112d010 num_prstatus_notes: 8 notes[0]: 7f77e512f010 (NT_PRSTATUS) [...] 2. vmcore device dumps are located between the first NT_PRSTATUS and offset_note. So, in above case, vmcore device dumps are at offset 4200 and are of size (0x7f77e512f010 - 0x7f77e112d010) = 67117056 3. Extract the vmcore device dumps using dd: # dd if=vmcore of=device.dump skip=4200 bs=1 count=67117056 4. Parse through all the notes having note type 0x700 in the device.dump to extract individual dumps. The first 64 bytes are the vmcoredd_header as follows: /* copied from include/uapi/linux/vmcore.h */ #define VMCOREDD_NOTE_NAME "LINUX" #define VMCOREDD_MAX_NAME_BYTES 44 struct vmcoredd_header { __u32 n_namesz; /* Name size */ __u32 n_descsz; /* Content size */ __u32 n_type; /* NT_VMCOREDD */ __u8 name[8]; /* LINUX\0\0\0 */ __u8 dump_name[VMCOREDD_MAX_NAME_BYTES]; /* Device dump's name */ }; By using n_namesz, n_descz, and the fixed 12 Byte ELF note header, we can find the next vmcore device dump. For example: First 64 bytes of device.dump are as follows: # xxd -l 64 device.dump 0000000: 0800 0000 ec0f 0002 0007 0000 4c49 4e55 ............LINU 0000010: 5800 0000 6378 6762 345f 3030 3030 3a30 X...cxgb4_0000:0 0000020: 323a 3030 2e34 0000 0000 0000 0000 0000 2:00.4.......... 0000030: 0000 0000 0000 0000 0000 0000 0000 0000 ................ Converting above to vmcoredd_header, we get: vmcoredd_header: n_namesz = 0x00000008; n_descsz = 0x02000fec; n_type = 0x00000700; name = "LINUX"; dump_name = "cxgb4_0000:02:00.4" Note that the dump size including the ELF note header (i.e. sizeof(n_namesz) + sizeof(n_descsz) + sizeof(n_type)) and the values in n_namesz and n_descsz is only 12 + 8 + 33558508 = 33558528 out of total 67117056 calculated in step 2. So, the next device dump is at: # xxd -l 64 -s 33558528 device.dump 2001000: 0800 0000 ec0f 0002 0007 0000 4c49 4e55 ............LINU 2001010: 5800 0000 6378 6762 345f 3030 3030 3a30 X...cxgb4_0000:0 2001020: 333a 3030 2e34 0000 0000 0000 0000 0000 3:00.4.......... 2001030: 0000 0000 0000 0000 0000 0000 0000 0000 ................ And so on... All of the above will be simplified with the new command. Thanks, Rahul -- Crash-utility mailing list Crash-utility(a)redhat.com https://www.redhat.com/mailman/listinfo/crash-utility --------------------------------------------------------------------- Intel Israel (74) Limited This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.