Re: [Crash-utility] netdump starting problem

----- "Anirudh Srinivasan" <srianirudh(a)gmail.com&gt; wrote: > hello friends, > > I was setting up netdump server in my workplace. I followed the > following procedure: > > Server Configuration: > > 1. > Verify that the netdump server is installed: rpm -q netdump-server . > If it is not installed, install it by running the command: up2date > netdump-server . > 2. > After the netdump server package is installed change the password for > the "netdump" user to something that you know: passwd netdump > 3. > Enable the netdump server: chkconfig netdump-server on > 4. > Start the netdump server: service netdump-server start > > Client Configuration: > > 1. > Verify that the netdump client is installed: rpm -q netdump . If it is > not installed, install it by running the command: up2date netdump . > 2. > Edit /etc/sysconfig/netdump and add the following line: > NETDUMPADDR=192.168.0.5 **192.168.0.5 should be changed to the ip > address of the netdump server. > 3. > Enter the following command and give the netdump password when > prompted: service netdump propagate > 4. > Enable the netdump client: chkconfig netdump on > 5. > Start the netdump client: service netdump start > > Now after doing this i get the following message: > > # service netdump start > netdump: cannot arp <ipaddress> > netdump: cannot find <ipaddress>in arp cache > netdump: can't resolve <ipaddress> MAC address > netdump server address resolution [FAILED] > > > What could be the reason for this ? How could i solve this? There's a couple other netdump masters on this list who can hopefully help you out, but I'd start by taking a look at the "print_address_info()" function in the /etc/rc.d/init.d/netdump script. It does a traceroute of your configured netdump-server IP to get the MAC address of the gateway if needed: # the needed MAC address is directly associated with the host # IP address only if client and server are on the same subnet # if not, the needed MAC address is that of the gateway; # either way, this will be the first IP address from traceroute trc_output="$(traceroute -i $DEV -n -m 1 $host_ip 2> /dev/null)" if [ $? -eq 0 ]; then trc_output="$(echo $trc_output | grep '^1 ' | awk '{print $2}')" for line in $trc_output; do mac_ip=$line; done else echo "$prog: cannot traceroute $host_ip on interface $DEV" 1>&2 mac_ip=$host_ip fi And then based upon what it got back, the subsequent arping error message that you're seeing is generated: # If the server is on the same subnet as the client, but is currently # offline, then the first hop will show up as our local address. This # would not be a working setup, so we set mac_ip to the server ip. localaddr=$(ip_of_device $DEV) [ "mac_ip" = "$localaddr" ] && mac_ip=$host_ip arping -c 1 -I $DEV $mac_ip &> /dev/null [ $? -ne 0 ] && echo "$prog: cannot arp $mac_ip on $DEV" 1>&2 So you can do the traceroute and arping commands above yourself to find out exactly where it's having a problem.