10:56 a.m.
Download from: http://people.redhat.com/anderson
or
https://github.com/crash-utility/crash/releases
The github master branch serves as a development branch that will contain
all patches that are queued for the next release:
$ git clone git://github.com/crash-utility/crash.git
Changelog:
- Fix for the "snap.so" extension module to pass the KASLR relocation
offset value in the ELF header for x86_64 kernels that are compiled
with CONFIG_RANDOMIZE_BASE. Without the patch, it is necessary to
use the "--kaslr=<offset>" command line option, or the session
fails with the message "WARNING: cannot read linux_banner string",
followed by "crash: vmlinux and vmcore do not match!".
(anderson(a)redhat.com)
- The native gdb "disassemble" command fails if the kernel has been
compiled with CONFIG_RANDOMIZE_BASE because the embedded gdb module
still operates under the assumption that the (non-relocated) text
locations in the vmlinux file are correct. The error message that
is issued is somewhat confusing, indicating "No function contains
specified address". This patch simply clarifies the error message
to indicate "crash: the gdb "disassemble" command is prohibited
because the kernel text was relocated by KASLR; use the crash "dis"
command instead."
(anderson(a)redhat.com)
- Fix for the "mach -m" command in Linux 4.9 and later kernels that
contain commit 475339684ef19e46f4702e2d185a869a5c454688, titled
"x86/e820: Prepare e280 code for switch to dynamic storage", in
which the "e820" symbol was changed from a static e820map structure
to a pointer to an e820map structure. Without the patch, the
command either displays just the header, or the header with several
nonsensical entries.
(anderson(a)redhat.com)
- Fix for Linux 4.10 and later kdump dumpfiles, or kernels that have
backported commit 401721ecd1dcb0a428aa5d6832ee05ffbdbffbbe, titled
"kexec: export the value of phys_base instead of symbol address".
Without the patch, if the x86_64 "phys_base" value in the VMCOREINFO
note is a negative decimal number, the crash session fails during
session intialization with a "page excluded" or "seek error" when
reading "page_offset_base".
(anderson(a)redhat.com)
- Fix for the PPC64 "pte" command. Without the patch, if the target
PTE references a present page, the physical address is incorrect.
(anderson(a)redhat.com)
- Fix for a 32-bit MIPS compilation error if glibc-2.25 or later has
been installed on the host build machine. Without the patch, the
build fails with the error message "mips-linux-nat.c:157:1: error:
conflicting types for 'ps_get_thread_area'".
(dengke.du(a)windriver.com)
- Fix for the validity check of S390X virtual addresses for 5-level
page tables where user space memory is mapped above 8 Petabytes.
Without the patch, "rd -u" fails and indicates "invalid user virtual
address", and "vtop -u" indicates that the address is "(not
mapped)".
(zaslonko(a)linux.vnet.ibm.com)
- Crash 7.1.5 commit c3413456599161cabc4e910a0ae91dfe5eec3c21 (xen: Add
support for dom0 with Linux kernel 3.19 and newer) from Daniel Kiper
implemented support for Xen dom0 vmcores after Linux 3.19 kernel
commit 054954eb051f35e74b75a566a96fe756015352c8 (xen: switch to
linear virtual mapped sparse p2m list). This patch can be deemed
subsequent to Daniel's patch, and implements support Xen PV domU
dumpfiles for Linux 3.19 and later kernels.
(honglei.wang@oracle com)
- Fix for the "dis" command to detect duplicate symbols in the case
of a "symbol+offset" argument where the duplicates are not contiguous
in the symbol list. Without the patch, the first of multiple symbol
instances is used in the address evaluation. With the patch, the
command will fail with the error message "dis: <symbol+offset>:
duplicate text symbols found:", followed by a list of the duplicate
symbols, and their file and line numbers if available.
(anderson(a)redhat.com)
- Enhancement to the error reporting mechanism for the "kmem -[sS]"
options. When a fatal error is encountered while gathering basic
CONFIG_SLUB statistics, it is possible that the slab cache name
is not displayed in the error message, and the line containing
the slab cache name, address, etc., is not displayed at all. With
this patch, an extra error message indicating "kmem: <cache-name>:
cannot gather relevant slab data" will be displayed under the
fatal error message; and under that, the CACHE address, cache NAME,
OBJSIZE, and SSIZE columns will be displayed, but with "?" under
the ALLOCATED, TOTAL, and SLABS columns.
(anderson(a)redhat.com)
- Fix to prevent the "tree -t radix" option from failing when it
encounters duplicate entries in a radix_tree_node[slots] array.
Without the patch, if a duplicate slot entry is found, the command
fails with the message "tree: duplicate tree entry: radix_tree_node:
<node address> slots[<index>]: <entry>\n". (The error can
be prevented if the command is preceded by "set hash off".) However,
certain radix trees contain duplicate entries by design, such as the
"pgmap_radix" radix tree, in which a radix_tree_node may contain
multiple instances of the same page_map structure. With the patch,
checks will only be made for duplicate radix_tree_node structures.
(anderson(a)redhat.com)
- First phase of future support for x86_64 5-level page tables. New
sets of virtual memory offsets have been #define'd and helper macros
and placeholder functions for the p4d page tables have been added.
The only functional changes with this patchset are dynamically-set
PGDIR_SHIFT and PHYSICAL_MASK_SHIFT values that are based upon the
kernel configuration.
(anderson(a)redhat.com)
- Fix for a build failure. Without the patch, if the build is done by
a user whose username cannot be determined from the user ID number,
the build fails immediately with a segmentation fault.
(sargun(a)sargun.me, anderson(a)redhat.com)
- Fix for Linux 4.13-rc0 commit 7fd8329ba502ef76dd91db561c7aed696b2c7720
"x86/boot/64: Rename init_level4_pgt and early_level4_pgt". Without
the patch, the crash session fails during initialization with the
error message "crash: cannot resolve "init_level4_pgt".
(anderson(a)redhat.com)
- The internal "build_data" string contains the compile-time date,
the user id of the builder, and the build machine hostname, and is
viewable by the "crash --buildinfo" command line option or by the
"help -B" option during runtime. This patch replaces that string
data with "reproducible build" if the SOURCE_DATE_EPOCH environment
variable contains a value string when the crash binary is compiled.
(bwiedemann(a)suse.de)
- Fix for Linux 4.13-rc1 commit 2d070eab2e8270c8a84d480bb91e4f739315f03d
"mm: consider zone which is not fully populated to have holes".
Without the patch, SPARSEMEM page struct addresses are incorrectly
calculated because a new section state, and an associated flag bit,
has been added to the low bits of the mem_section.section_mem_map
address; the extra bit is erroneously passed back as part of the
section_mem_map and resultant page struct address, leading to
errors in commands such as "kmem -p", "kmem -s", "kmem
-n", and any
other command that translates a physical address to its page struct
address.
(anderson(a)redhat.com)
- Enhancement to the S390X "vtop" command to display page table walk
information, adding output showing the following page table contents:
"Region-First-Table Entry" (RFTE)
"Region-Second-Table Entry" (RSTE)
"Region-Third-Table Entry" (RTTE)
"Segment Table Entry" (STE)
"Page Table Entry" (PTE)
"Read address of page" (PAGE)
Depending on the size of the address space, the page tables can start
at different levels. For example:
crash> vtop 3ff8000c000
VIRTUAL PHYSICAL
3ff8000c000 2e3832000
PAGE DIRECTORY: 0000000000aaa000
RTTE: 0000000000aadff8 => 00000002e3c00007
STE: 00000002e3c00000 => 00000002e3df7000
PTE: 00000002e3df7060 => 00000002e383203d
PAGE: 00000002e3832000
PAGE PHYSICAL MAPPING INDEX CNT FLAGS
3d10b8e0c80 2e3832000 0 0 1 7fffc0000000000
(holzheu(a)linux.vnet.ibm.com)
- Fix the s390dbf time stamps for S390X kernel versions 4.11 and 4.14.
With kernel commit ea417aa8a38bc7db ("s390/debug: make debug event
time stamps relative to the boot TOD clock") for s390dbf time is
stored relative to the kernel boot time. In order to still show
absolute time since 1970 we have to detect those kernels and re-add
the boot time before printing the records. We can use the
tod_to_timeval() symbol to check for those kernels because the
patch has removed the symbol. With kernel commit 6e2ef5e4f6cc5734
("s390/time: add support for the TOD clock epoch extension")
the symbol name for storing the boot time has changed from
"sched_clock_base_cc" to "tod_clock_base". This commit is
currently
on the s390 features branch and will be integrated in Linux 4.14.
(holzheu(a)linux.vnet.ibm.com)
- Further enhancement to the S390X "vtop" command to translate the
binary values of the hardware flags for region, segment and page
table entries. For example:
crash> vtop -u 0x60000000000000
VIRTUAL PHYSICAL
60000000000000 5b50a000
PAGE DIRECTORY: 000000005cea0000
RFTE: 000000005cea0018 => 000000006612400f (flags = 00f)
flags in binary : P=0; TF=00; I=0; TT=11; TL=11
RSTE: 0000000066124000 => 000000005d91800b (flags = 00b)
flags in binary : P=0; TF=00; I=0; TT=10; TL=11
RTTE: 000000005d918000 => 000000006615c007 (flags = 007)
flags in binary : FC=0; P=0; TF=00; I=0; CR=0; TT=01; TL=11
STE: 000000006615c000 => 000000005ce48800 (flags = 800)
flags in binary : FC=0; P=0; I=0; CS=0; TT=00
PTE: 000000005ce48800 => 000000005b50a03f (flags = 03f)
flags in binary : I=0; P=0
PAGE: 000000005b50a000
or for large pages:
crash> vtop -k 0x3d100000000
VIRTUAL PHYSICAL
3d100000000 77c00000
PAGE DIRECTORY: 0000000001210000
RTTE: 0000000001213d10 => 0000000077dc4007 (flags = 007)
flags in binary : FC=0; P=0; TF=00; I=0; CR=0; TT=01; TL=11
STE: 0000000077dc4000 => 0000000077c03403 (flags = 03403)
flags in binary : AV=0, ACC=0011; F=0; FC=1; P=0; I=0; CS=0; TT=00
(zaslonko(a)linux.vnet.ibm.com)
- PPC64 kernel commit 2f18d533757da3899f4bedab0b2c051b080079dc lowered
the max real address to 53 bits. Without this patch, the warning
message "WARNING: cannot access vmalloc'd module memory" appears
during initialization, and any command that attempts to read a
vmalloc'd kernel virtual address will fail and display "read error"
messages.
(hbathini(a)linux.vnet.ibm.com)
- Display the KASLR relocation value warning message whenever it is
in use. Without the patch, the message may not get displayed
if the --kaslr option is used, or if the dumpfile is a vmcore
generated by the current snap.so extension module, which now
exports the relocation value in the header.
(anderson(a)redhat.com)
- Fix to prevent an initialization-time failure when running a live
session on a host system that does not have a "/usr/src" directory.
Without the patch, the session fails with the message "*** Error in
'crash': free(): invalid pointer: <address> ***".
(Lei Chen)
- Fix for the ARM64 "bt" command's display of the user mode exception
frame at the top of the stack in Linux 4.7 and later kernels.
Without the patch, the contents of the user mode exception frame are
invalid due to the miscalculation of the starting address of the
pt_regs structure on the kernel stack.
(anderson(a)redhat.com)
- Integrated support for usage of the Linux 4.14 ORC unwinder by the
x86_64 "bt" command. Kernels configured with CONFIG_ORC_UNWINDER
contain .orc_unwind and .orc_unwind_ip sections that can be queried
to determine the stack frame size of any text address within a kernel
function. For kernels not configured with CONFIG_FRAME_POINTER,
the crash utility does frame size calculation by disassembling a
function from its beginning to the specified text address, counting
the push, pop, and add/sub rsp instructions, accounting for retq
instructions that occur in the middle of a function. With this patch,
access to the new ORC sections has been plugged into the existing
frame size calculator, resulting in a more efficient and accurate
manner of determining frame sizes, and as a result, more accurate
backtraces.
(anderson(a)redhat.com)
- Fix for the ARM64 "bt" command when run against Linux 4.14-rc1.
Without the patch, a message indicating "crash: builtin stackframe.sp
offset incorrect!" is issued during session initialization, and the
"bt" command fails with the error message "bt: invalid structure
member offset: task_struct_thread_context_sp".
(anderson(a)redhat.com)
- For for the "task -R <member>" option on Linux 4.13 and later kernels
where the task_struct contains a "randomized_struct_fields_start" to
"randomized_struct_fields_end" section. Without the patch, a member
argument that is inside the randomized section is not found.
(anderson(a)redhat.com)
- Fix for the "snap.so" extension module to pass the value of the ARM64
"kimage_voffset" value in the ELF header. Without the patch, it is
necessary to use the "--machdep kvimage_offset=<value>" command line
option, or the session fails with the message "crash: vmlinux and
vmcore do not match!".
(anderson(a)redhat.com)