Re: [Crash-utility] Kernel Crash Analysis on Android
by Shankar, AmarX
Hi Dave,
Thanks for your info regarding kexec tool.
I am unable to download kexec from below link.
http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/kexec-too...
It says HTTP 404 Page Not Found.
Could you please guide me on this?
Thanks & Regards,
Amar Shankar
> On Wed, Mar 21, 2012 at 06:00:00PM +0000, Shankar, AmarX wrote:
>
> > I want to do kernel crash Analysis on Android Merrifield Target.
> >
> > Could someone please help me how to do it?
>
> Merrifield is pretty much similar than Medfield, e.g it has x86 core. So I
> guess you can follow the instructions how to setup kdump on x86 (see
> Documentation/kdump/kdump.txt) unless you already have that configured.
>
> crash should support this directly presuming you have vmlinux/vmcore files to
> feed it. You can configure crash to support x86 on x86_64 host by running:
>
> % make target=X86
> & make
>
> (or something along those lines).
Right -- just the first make command will suffice, i.e., when running
on an x86_64 host:
$ wget http://people.redhat.com/anderson/crash-6.0.4.tar.gz
$ tar xzf crash-6.0.4.tar.gz
...
$ cd crash-6.0.4
$ make target=X86
...
$ ./crash <path-to>/vmlinux <path-to>/vmcore
Dave
From: Shankar, AmarX
Sent: Wednesday, March 21, 2012 11:30 PM
To: 'crash-utility(a)redhat.com'
Subject: Kernel Crash Analysis on Android
Hi,
I want to do kernel crash Analysis on Android Merrifield Target.
Could someone please help me how to do it?
Thanks & Regards,
Amar Shankar
1 year
[PATCH] kmem, snap: iomem/ioport display and vmcore snapshot support
by HATAYAMA Daisuke
Some days ago I was in a situation that I had to convert vmcore in
kvmdump format into ELF since some extension module we have locally
can be used only on relatively old crash utility, around version 4,
but such old crash utility cannot handle kvmdump format.
To do the conversion in handy, I used snap command with some modifications
so that it tries to use iomem information in vmcore instead of host's
/proc/iomem. This patch is its cleaned-up version.
In this development, I naturally got down to also making an interface
for an access to resource objects, and so together with the snap
command's patch, I also extended kmem command for iomem/ioport
support. Actually:
kmem -r displays /proc/iomem
crash> kmem -r
00000000-0000ffff : reserved
00010000-0009dbff : System RAM
0009dc00-0009ffff : reserved
000c0000-000c7fff : Video ROM
...
and kmem -R displays /proc/ioport
crash> kmem -R
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
...
Looking into old version of kernel source code back, resource structure
has been unchanged since linux-2.4.0. I borrowed the way of walking on
resouce tree in this patch from the lastest v3.3-rc series, but I
guess the logic is also applicable to old kernels. I expect Dave's
regression testsuite.
Also, there would be another command more sutable for iomem/ioport.
If necessay, I'll repost the patch.
---
HATAYAMA Daisuke (4):
Add vmcore snapshot support
Add kmem -r and -R options
Add dump iomem/ioport functions; a helper for resource objects
Add a helper function for iterating resource objects
defs.h | 9 ++++
extensions/snap.c | 54 ++++++++++++++++++++++-
help.c | 2 +
memory.c | 122 +++++++++++++++++++++++++++++++++++++++++++++++++++--
4 files changed, 180 insertions(+), 7 deletions(-)
--
Thanks.
HATAYAMA Daisuke
1 year
Re: [Crash-utility] question about phys_base
by Dave Anderson
----- Original Message -----
> >
> > OK, so then I don't understand what you mean by "may be the same"?
> >
> > You didn't answer my original question, but if I understand you correctly,
> > it would be impossible for the qemu host to create a PT_LOAD segment that
> > describes an x86_64 guest's __START_KERNEL_map region, because the host
> > doesn't know that what kind of kernel the guest is running.
>
> Yes. Even if the guest is linux, it is still impossible to do it. Because
> the guest maybe in the second kernel.
>
> qemu-dump walks all guest's page table and collect virtual address and
> physical address mapping. If the page is not used by guest, the virtual is set
> to 0. I create PT_LOAD according to such mapping. So if the guest is linux,
> there may be a PT_LOAD segment that describes __START_KERNEL_map region.
> But the information stored in PT_LOAD maybe for the second kernel. If crash
> uses it, crash will see the second kernel, not the first kernel.
Just to be clear -- what do you mean by the "second" kernel? Do you
mean that a guest kernel crashed guest, and did a kdump operation,
and that second kdump kernel failed somehow, and now you're trying
to do a "virsh dump" on the kdump kernel?
Dave
1 year
question about phys_base
by Wen Congyang
Hi, Dave
I am implementing a new dump command in the qemu. The vmcore's
format is elf(like kdump). And I try to provide phys_base in
the PT_LOAD. But if the os uses the first vcpu do kdump, the
value of phys_base is wrong.
I find a function x86_64_virt_phys_base() in crash's code.
Is it OK to call this function first? If the function
successes, we do not calculate phys_base according to PT_LOAD.
Thanks
Wen Congyang
1 year
[PATCH] runq: search current task's runqueue explicitly
by HATAYAMA Daisuke
Currently, runq sub-command doesn't consider CFS runqueue's current
task removed from CFS runqueue. Due to this, the remaining CFS
runqueus that follow the current task's is not displayed. This patch
fixes this by making runq sub-command search current task's runqueue
explicitly.
Note that CFS runqueue exists for each task group, and so does CFS
runqueue's current task, and the above search needs to be done
recursively.
Test
====
On vmcore I made 7 task groups:
root group --- A --- AA --- AAA
+ +- AAB
|
+- AB --- ABA
+- ABB
and then I ran three CPU bound tasks, which is exactly the same as
int main(void) { for (;;) continue; return 0; }
for each task group, including root group; so total 24 tasks. For
readability, I annotated each task name with its belonging group name.
For example, loop.ABA belongs to task group ABA.
Look at CPU0 collumn below. [before] lacks 8 tasks and [after]
successfully shows all tasks on the runqueue, which is identical to
the result of [sched debug] that is expected to ouput correct result.
I'll send this vmcore later.
[before]
crash> runq | cat
CPU 0 RUNQUEUE: ffff88000a215f80
CURRENT: PID: 28263 TASK: ffff880037aaa040 COMMAND: "loop.ABA"
RT PRIO_ARRAY: ffff88000a216098
[no tasks queued]
CFS RB_ROOT: ffff88000a216010
[120] PID: 28262 TASK: ffff880037cc40c0 COMMAND: "loop.ABA"
<cut>
[after]
crash_fix> runq
CPU 0 RUNQUEUE: ffff88000a215f80
CURRENT: PID: 28263 TASK: ffff880037aaa040 COMMAND: "loop.ABA"
RT PRIO_ARRAY: ffff88000a216098
[no tasks queued]
CFS RB_ROOT: ffff88000a216010
[120] PID: 28262 TASK: ffff880037cc40c0 COMMAND: "loop.ABA"
[120] PID: 28271 TASK: ffff8800787a8b40 COMMAND: "loop.ABB"
[120] PID: 28272 TASK: ffff880037afd580 COMMAND: "loop.ABB"
[120] PID: 28245 TASK: ffff8800785e8b00 COMMAND: "loop.AB"
[120] PID: 28246 TASK: ffff880078628ac0 COMMAND: "loop.AB"
[120] PID: 28241 TASK: ffff880078616b40 COMMAND: "loop.AA"
[120] PID: 28239 TASK: ffff8800785774c0 COMMAND: "loop.AA"
[120] PID: 28240 TASK: ffff880078617580 COMMAND: "loop.AA"
[120] PID: 28232 TASK: ffff880079b5d4c0 COMMAND: "loop.A"
<cut>
[sched debug]
crash> runq -d
CPU 0
[120] PID: 28232 TASK: ffff880079b5d4c0 COMMAND: "loop.A"
[120] PID: 28239 TASK: ffff8800785774c0 COMMAND: "loop.AA"
[120] PID: 28240 TASK: ffff880078617580 COMMAND: "loop.AA"
[120] PID: 28241 TASK: ffff880078616b40 COMMAND: "loop.AA"
[120] PID: 28245 TASK: ffff8800785e8b00 COMMAND: "loop.AB"
[120] PID: 28246 TASK: ffff880078628ac0 COMMAND: "loop.AB"
[120] PID: 28262 TASK: ffff880037cc40c0 COMMAND: "loop.ABA"
[120] PID: 28263 TASK: ffff880037aaa040 COMMAND: "loop.ABA"
[120] PID: 28271 TASK: ffff8800787a8b40 COMMAND: "loop.ABB"
[120] PID: 28272 TASK: ffff880037afd580 COMMAND: "loop.ABB"
<cut>
Diff stat
=========
defs.h | 1 +
task.c | 37 +++++++++++++++++--------------------
2 files changed, 18 insertions(+), 20 deletions(-)
Thanks.
HATAYAMA, Daisuke
1 year
[RFC] makedumpfile, crash: LZO compression support
by HATAYAMA Daisuke
Hello,
This is a RFC patch set that adds LZO compression support to
makedumpfile and crash utility. LZO is as good as in size but by far
better in speed than ZLIB, leading to reducing down time during
generation of crash dump and refiltering.
How to build:
1. Get LZO library, which is provided as lzo-devel package on recent
linux distributions, and is also available on author's website:
http://www.oberhumer.com/opensource/lzo/.
2. Apply the patch set to makedumpfile v1.4.0 and crash v6.0.0.
3. Build both using make. But for crash, do the following now:
$ make CFLAGS="-llzo2"
How to use:
I've newly used -l option for lzo compression in this patch. So for
example, do as follows:
$ makedumpfile -l vmcore dumpfile
$ crash vmlinux dumpfile
Request of configure-like feature for crash utility:
I would like configure-like feature on crash utility for users to
select wheather to add LZO feature actually or not in build-time,
that is: ./configure --enable-lzo or ./configure --disable-lzo.
The reason is that support staff often downloads and installs the
latest version of crash utility on machines where lzo library is not
provided.
Looking at the source code, it looks to me that crash does some kind
of configuration processing in a local manner, around configure.c,
and I guess it's difficult to use autoconf tools directly.
Or is there another better way?
Performance Comparison:
Sample Data
Ideally, I must have measured the performance for many enough
vmcores generated from machines that was actually running, but now
I don't have enough sample vmcores, I couldn't do so. So this
comparison doesn't answer question on I/O time improvement. This
is TODO for now.
Instead, I choosed worst and best cases regarding compression
ratio and speed only. Specifically, the former is /dev/urandom and
the latter is /dev/zero.
I get the sample data of 10MB, 100MB and 1GB by doing like this:
$ dd bs=4096 count=$((1024*1024*1024/4096)) if=/dev/urandom of=urandom.1GB
How to measure
Then I performed compression for each block, 4096 bytes, and
measured total compression time and output size. See attached
mycompress.c.
Result
See attached file result.txt.
Discussion
For both kinds of data, lzo's compression was considerably quicker
than zlib's. Compression ratio is about 37% for urandom data, and
about 8.5% for zero data. Actual situation of physical memory
would be in between the two cases, and so I guess average
compression time ratio is between 37% and 8.5%.
Although beyond the topic of this patch set, we can estimate worst
compression time on more data size since compression is performed
block size wise and the compression time increases
linearly. Estimated worst time on 2TB memory is about 15 hours for
lzo and about 40 hours for zlib. In this case, compressed data
size is larger than the original, so they are really not used,
compression time is fully meaningless. I think compression must be
done in parallel, and I'll post such patch later.
Diffstat
* makedumpfile
diskdump_mod.h | 3 +-
makedumpfile.c | 98 +++++++++++++++++++++++++++++++++++++++++++++++++------
makedumpfile.h | 12 +++++++
3 files changed, 101 insertions(+), 12 deletions(-)
* crash
defs.h | 1 +
diskdump.c | 20 +++++++++++++++++++-
diskdump.h | 3 ++-
3 files changed, 22 insertions(+), 2 deletions(-)
TODO
* evaluation including I/O time using actual vmcores
Thanks.
HATAYAMA, Daisuke
1 year
Re: [Crash-utility] [RFI] Support Fujitsu's sadump dump format
by tachibana＠mxm.nes.nec.co.jp
Hi Hatayama-san,
On 2011/06/29 12:12:18 +0900, HATAYAMA Daisuke <d.hatayama(a)jp.fujitsu.com> wrote:
> From: Dave Anderson <anderson(a)redhat.com>
> Subject: Re: [Crash-utility] [RFI] Support Fujitsu's sadump dump format
> Date: Tue, 28 Jun 2011 08:57:42 -0400 (EDT)
>
> >
> >
> > ----- Original Message -----
> >> Fujitsu has stand-alone dump mechanism based on firmware level
> >> functionality, which we call SADUMP, in short.
> >>
> >> We've maintained utility tools internally but now we're thinking that
> >> the best is crash utility and makedumpfile supports the sadump format
> >> for the viewpoint of both portability and maintainability.
> >>
> >> We'll be of course responsible for its maintainance in a continuous
> >> manner. The sadump dump format is very similar to diskdump format and
> >> so kdump (compressed) format, so we estimate patch set would be a
> >> relatively small size.
> >>
> >> Could you tell me whether crash utility and makedumpfile can support
> >> the sadump format? If OK, we'll start to make patchset.
I think it's not bad to support sadump by makedumpfile. However I have
several questions.
- Do you want to use makedumpfile to make an existing file that sadump has
dumped small?
- It isn't possible to support the same form as kdump-compressed format
now, is it?
- When the information that makedumpfile reads from a note of /proc/vmcore
(or a header of kdump-compressed format) is added by an extension of
makedumpfile, do you need to modify sadump?
Thanks
tachibana
> >
> > Sure, yes, the crash utility can always support another dumpfile format.
> >
>
> Thanks. It helps a lot.
>
> > It's unclear to me how similar SADUMP is to diskdump/compressed-kdump.
> > Does your internal version patch diskdump.c, or do you maintain your
> > own "sadump.c"? I ask because if your patchset is at all intrusive,
> > I'd prefer it be kept in its own file, primarily for maintainability,
> > but also because SADUMP is essentially a black-box to anybody outside
> > Fujitsu.
>
> What I meant when I used ``similar'' is both literally and
> logically. The format consists of diskdump header-like header, two
> kinds of bitmaps used for the same purpose as those in diskump format,
> and memory data. They can be handled in common with the existing data
> structure, diskdump_data, non-intrusively, so I hope they are placed
> in diskdump.c.
>
> On the other hand, there's a code to be placed at such specific
> area. sadump is triggered depending on kdump's progress and so
> register values to be contained in vmcore varies according to the
> progress: If crash_notes has been initialized when sadump is
> triggered, sadump packs the register values in crash_notes; if not
> yet, packs registers gathered by firmware. This is sadump specific
> processing, so I think putting it in specific sadump.c file is a
> natural and reasonable choise.
>
> Anyway, I have not made any patch set for this. I'll post a patch set
> when I complete.
>
> Again, thanks a lot for the positive answer.
>
> Thanks.
> HATAYAMA, Daisuke
>
>
> _______________________________________________
> kexec mailing list
> kexec(a)lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/kexec
1 year
[PATCH] gcore: Add MIPS support
by Rabin Vincent
From: Rabin Vincent <rabinv(a)axis.com>
This adds basic support for MIPS to the gcore extension.
---
gcore.mk | 10 +++
libgcore/gcore_coredump.c | 2 +-
libgcore/gcore_defs.h | 39 ++++++++++--
libgcore/gcore_mips.c | 159 ++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 205 insertions(+), 5 deletions(-)
create mode 100644 libgcore/gcore_mips.c
diff --git a/gcore.mk b/gcore.mk
index c9683d4..ffc9ce7 100644
--- a/gcore.mk
+++ b/gcore.mk
@@ -42,6 +42,12 @@ ifeq ($(shell arch), aarch64)
ARCH=SUPPORTED
endif
+ifeq ($(shell arch), mips)
+ TARGET=MIPS
+ TARGET_CFLAGS=
+ ARCH=SUPPORTED
+endif
+
ifeq ($(shell arch), ppc64)
TARGET=PPC64
TARGET_CFLAGS=
@@ -85,6 +91,10 @@ ifneq (,$(findstring $(TARGET), ARM64))
GCORE_CFILES += libgcore/gcore_arm64.c
endif
+ifneq (,$(findstring $(TARGET), MIPS))
+GCORE_CFILES += libgcore/gcore_mips.c
+endif
+
ifneq (,$(findstring $(TARGET), PPC64))
GCORE_CFILES += libgcore/gcore_ppc64.c
endif
diff --git a/libgcore/gcore_coredump.c b/libgcore/gcore_coredump.c
index 892ddf9..e91f29a 100644
--- a/libgcore/gcore_coredump.c
+++ b/libgcore/gcore_coredump.c
@@ -683,7 +683,7 @@ fill_prstatus_note(struct elf_note_info *info, struct task_context *tc,
struct memelfnote *memnote)
{
struct elf_prstatus *prstatus;
-#if defined(X86) || defined(X86_64) || defined(ARM) || defined(PPC64)
+#if defined(X86) || defined(X86_64) || defined(ARM) || defined(MIPS) || defined(PPC64)
struct user_regs_struct *regs = (struct user_regs_struct *)memnote->data;
#endif
#ifdef ARM64
diff --git a/libgcore/gcore_defs.h b/libgcore/gcore_defs.h
index ba1fde2..6fdb943 100644
--- a/libgcore/gcore_defs.h
+++ b/libgcore/gcore_defs.h
@@ -94,6 +94,26 @@
#define Elf_Nhdr Elf32_Nhdr
#endif
+#ifdef MIPS
+#define ELF_EXEC_PAGESIZE 4096
+
+#define ELF_MACHINE EM_MIPS
+#define ELF_OSABI ELFOSABI_NONE
+
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2LSB
+#define ELF_ARCH EM_MIPS
+
+#define Elf_Half Elf32_Half
+#define Elf_Word Elf32_Word
+#define Elf_Off Elf32_Off
+
+#define Elf_Ehdr Elf32_Ehdr
+#define Elf_Phdr Elf32_Phdr
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Nhdr Elf32_Nhdr
+#endif
+
#ifdef ARM64
#define ELF_EXEC_PAGESIZE PAGESIZE()
@@ -290,6 +310,11 @@ extern void gcore_default_regsets_init(void);
#define REGSET_VIEW_MACHINE EM_AARCH64
#endif
+#ifdef MIPS
+#define REGSET_VIEW_NAME "mips"
+#define REGSET_VIEW_MACHINE EM_MIPS
+#endif
+
#ifdef PPC64
#define REGSET_VIEW_NAME "ppc64"
#define REGSET_VIEW_MACHINE EM_PPC64
@@ -594,6 +619,12 @@ struct user_regs_struct32{
#endif /* GCORE_ARCH_COMPAT */
#endif
+#ifdef MIPS
+struct user_regs_struct {
+ unsigned long gregs[45];
+};
+#endif
+
#ifdef PPC64
/* taken from asm/ptrace.h */
struct user_regs_struct {
@@ -620,13 +651,13 @@ struct user_regs_struct {
};
#endif
-#if defined(X86) || defined(X86_64) || defined(ARM)
+#if defined(X86) || defined(X86_64) || defined(ARM) || defined(MIPS)
typedef ulong elf_greg_t;
#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
typedef elf_greg_t elf_gregset_t[ELF_NGREG];
#endif
-#if defined(X86) || defined(ARM)
+#if defined(X86) || defined(ARM) || defined(MIPS)
#define PAGE_SIZE 4096
#endif
#if defined(ARM64) || defined(PPC64)
@@ -783,7 +814,7 @@ struct elf_prstatus
int pr_fpvalid; /* True if math co-processor being used. */
};
-#if defined(X86) || defined(X86_64) || defined(ARM)
+#if defined(X86) || defined(X86_64) || defined(ARM) || defined(MIPS)
typedef unsigned short __kernel_old_uid_t;
typedef unsigned short __kernel_old_gid_t;
#endif
@@ -803,7 +834,7 @@ typedef __kernel_gid_t __kernel_old_gid_t;
typedef __kernel_old_uid_t old_uid_t;
typedef __kernel_old_gid_t old_gid_t;
-#if defined(X86) || defined(ARM)
+#if defined(X86) || defined(ARM) || defined(MIPS)
typedef unsigned short __kernel_uid_t;
typedef unsigned short __kernel_gid_t;
#endif
diff --git a/libgcore/gcore_mips.c b/libgcore/gcore_mips.c
new file mode 100644
index 0000000..be67d51
--- /dev/null
+++ b/libgcore/gcore_mips.c
@@ -0,0 +1,159 @@
+/* gcore_mips.c -- core analysis suite
+ *
+ * Copyright (C) 2016 Axis Communications
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#if defined(MIPS)
+
+#include "defs.h"
+#include <gcore_defs.h>
+#include <stdint.h>
+#include <elf.h>
+#include <asm/ldt.h>
+
+#define MIPS32_EF_R0 6
+#define MIPS32_EF_R1 7
+#define MIPS32_EF_R26 32
+#define MIPS32_EF_R27 33
+#define MIPS32_EF_R31 37
+#define MIPS32_EF_LO 38
+#define MIPS32_EF_HI 39
+#define MIPS32_EF_CP0_EPC 40
+#define MIPS32_EF_CP0_BADVADDR 41
+#define MIPS32_EF_CP0_STATUS 42
+#define MIPS32_EF_CP0_CAUSE 43
+
+static int gpr_get(struct task_context *target,
+ const struct user_regset *regset,
+ unsigned int size, void *buf)
+{
+ static int once;
+ struct user_regs_struct *regs = buf;
+ struct mips_pt_regs_main *mains;
+ struct mips_pt_regs_cp0 *cp0;
+ char pt_regs[SIZE(pt_regs)];
+ int i;
+
+ /*
+ * All registers are saved in thread_info.regs only on certain types of
+ * entries to the kernel (such as abort handling). For other types of
+ * entries (such as system calls), only a subset of the registers are
+ * saved on entry and the rest are saved on the stack according to the
+ * ABI's calling conventions. To always get the full register set we
+ * would have to unwind the stack and find where the registers are by
+ * using DWARF information. We don't have an implementation for this
+ * right now so warn to avoid misleading the user. Only warn since
+ * this function is called multiple times even for a single invocation
+ * of the gcore command.
+ */
+ if (!once) {
+ once = 1;
+ error(WARNING, "WARNING: Current register values may be inaccurate\n");
+ }
+
+ readmem(machdep->get_stacktop(target->task) - 32 - SIZE(pt_regs),
+ KVADDR, pt_regs, SIZE(pt_regs), "genregs_get: pt_regs",
+ gcore_verbose_error_handle());
+
+ mains = (struct mips_pt_regs_main *) (pt_regs + OFFSET(pt_regs_regs));
+ cp0 = (struct mips_pt_regs_cp0 *) \
+ (pt_regs + OFFSET(pt_regs_cp0_badvaddr));
+
+ BZERO(regs, sizeof(*regs));
+
+ for (i = MIPS32_EF_R1; i <= MIPS32_EF_R31; i++) {
+ /* k0/k1 are copied as zero. */
+ if (i == MIPS32_EF_R26 || i == MIPS32_EF_R27)
+ continue;
+
+ regs->gregs[i] = mains->regs[i - MIPS32_EF_R0];
+ }
+
+ regs->gregs[MIPS32_EF_LO] = mains->lo;
+ regs->gregs[MIPS32_EF_HI] = mains->hi;
+ regs->gregs[MIPS32_EF_CP0_EPC] = cp0->cp0_epc;
+ regs->gregs[MIPS32_EF_CP0_BADVADDR] = cp0->cp0_badvaddr;
+ regs->gregs[MIPS32_EF_CP0_STATUS] = mains->cp0_status;
+ regs->gregs[MIPS32_EF_CP0_CAUSE] = cp0->cp0_cause;
+
+ return 0;
+}
+
+enum gcore_regset {
+ REGSET_GPR,
+};
+
+static struct user_regset mips_regsets[] = {
+ [REGSET_GPR] = {
+ .core_note_type = NT_PRSTATUS,
+ .name = "CORE",
+ .size = ELF_NGREG * sizeof(unsigned int),
+ .get = gpr_get,
+ },
+};
+
+#ifndef ARRAY_SIZE
+#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
+#endif
+
+static const struct user_regset_view mips_regset_view = {
+ .name = "mips",
+ .regsets = mips_regsets,
+ .n = ARRAY_SIZE(mips_regsets),
+ .e_machine = EM_MIPS,
+};
+
+const struct user_regset_view *
+task_user_regset_view(void)
+{
+ return &mips_regset_view;
+}
+
+int gcore_is_arch_32bit_emulation(struct task_context *tc)
+{
+ return FALSE;
+}
+
+ulong gcore_arch_get_gate_vma(void)
+{
+ return 0UL;
+}
+
+char *gcore_arch_vma_name(ulong vma)
+{
+ ulong mm, vm_start, vdso;
+
+ readmem(vma + OFFSET(vm_area_struct_vm_mm), KVADDR, &mm, sizeof(mm),
+ "gcore_arch_vma_name: vma->vm_mm",
+ gcore_verbose_error_handle());
+
+ readmem(vma + OFFSET(vm_area_struct_vm_start), KVADDR, &vm_start,
+ sizeof(vm_start), "gcore_arch_vma_name: vma->vm_start",
+ gcore_verbose_error_handle());
+
+ readmem(mm + GCORE_OFFSET(mm_struct_context) +
+ GCORE_OFFSET(mm_context_t_vdso), KVADDR, &vdso,
+ sizeof(vdso), "gcore_arch_vma_name: mm->context.vdso",
+ gcore_verbose_error_handle());
+
+ if (mm && vm_start == vdso)
+ return "[vdso]";
+
+ return NULL;
+}
+
+int gcore_arch_vsyscall_has_vm_alwaysdump_flag(void)
+{
+ return FALSE;
+}
+
+#endif /* defined(MIPS) */
--
2.1.4
7 years, 8 months
[PATCH] trace: don't use uninited max_tr_ring_buffer
by Rabin Vincent
From: Rabin Vincent <rabinv(a)axis.com>
This max buffer is not available in all configurations of the kernel so
we shouldn't attempt to use the unitialized max_tr_ring_buffer variable.
A similar check existed previously before the recent rework of the trace
extension to support multiple buffers.
---
extensions/trace.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/extensions/trace.c b/extensions/trace.c
index 51df98d..22039a9 100644
--- a/extensions/trace.c
+++ b/extensions/trace.c
@@ -487,6 +487,9 @@ static int ftrace_init_trace(struct trace_instance *ti, ulong instance_addr)
ti->pages) < 0)
goto out_fail;
+ if (!ti->max_tr_ring_buffer)
+ return 0;
+
ti->max_tr_buffers = calloc(sizeof(*ti->max_tr_buffers), nr_cpu_ids);
if (ti->max_tr_buffers == NULL)
goto out_fail;
--
2.1.4
7 years, 9 months
