[PATCH v4] arm64: Add vmemmap support
by Huang Shijie
If the kernel exports the vmmemap then we can use that symbol in
crash to optimize access. vmmemap is just an array of page structs
after all.
This patch tries to:
1.) Get the "vmemmap" from the vmcore file.
If we can use the "vmemmap", we implement the arm64_vmemmap_is_page_ptr
and set it to machdep->is_page_ptr.
2.) We implement the fast page_to_pfn code in arm64_vmemmap_is_page_ptr.
3.) Dump it in "help -m"
Test result:
Without the this patch:
#files -p xxx > /dev/null (xxx is the inode of vmlinux which is 441M)
This costed about 185 seconds.
With the this patch:
#files -p xxx > /dev/null (xxx is the inode of vmlinux which is 441M)
This costed 3 seconds.
Signed-off-by: Huang Shijie <shijie(a)os.amperecomputing.com>
---
v3 --> v4:
Use "files -p" to measure the time.
Dump it in "help -m"
---
arm64.c | 26 ++++++++++++++++++++++++++
defs.h | 1 +
2 files changed, 27 insertions(+)
diff --git a/arm64.c b/arm64.c
index 57965c6..fc4ba64 100644
--- a/arm64.c
+++ b/arm64.c
@@ -117,6 +117,28 @@ static void arm64_calc_kernel_start(void)
ms->kimage_end = (sp ? sp->value : 0);
}
+static int
+arm64_vmemmap_is_page_ptr(ulong addr, physaddr_t *phys)
+{
+ ulong size = SIZE(page);
+ ulong pfn, nr;
+
+
+ if (IS_SPARSEMEM() && (machdep->flags & VMEMMAP) &&
+ (addr >= VMEMMAP_VADDR && addr <= VMEMMAP_END) &&
+ !((addr - VMEMMAP_VADDR) % size)) {
+
+ pfn = (addr - machdep->machspec->vmemmap) / size;
+ nr = pfn_to_section_nr(pfn);
+ if (valid_section_nr(nr)) {
+ if (phys)
+ *phys = PTOB(pfn);
+ return TRUE;
+ }
+ }
+ return FALSE;
+}
+
/*
* Do all necessary machine-specific setup here. This is called several times
* during initialization.
@@ -382,6 +404,9 @@ arm64_init(int when)
machdep->stacksize = ARM64_STACK_SIZE;
machdep->flags |= VMEMMAP;
+ /* If vmemmap exists, it means kernel enabled CONFIG_SPARSEMEM_VMEMMAP */
+ if (arm64_get_vmcoreinfo(&ms->vmemmap, "SYMBOL(vmemmap)", NUM_HEX))
+ machdep->is_page_ptr = arm64_vmemmap_is_page_ptr;
machdep->uvtop = arm64_uvtop;
machdep->is_uvaddr = arm64_is_uvaddr;
@@ -1096,6 +1121,7 @@ arm64_dump_machdep_table(ulong arg)
fprintf(fp, " vmemmap_vaddr: %016lx\n", ms->vmemmap_vaddr);
fprintf(fp, " vmemmap_end: %016lx\n", ms->vmemmap_end);
if (machdep->flags & NEW_VMEMMAP) {
+ fprintf(fp, " vmemmap: %016lx\n", ms->vmemmap);
fprintf(fp, " kimage_text: %016lx\n", ms->kimage_text);
fprintf(fp, " kimage_end: %016lx\n", ms->kimage_end);
fprintf(fp, " kimage_voffset: %016lx\n", ms->kimage_voffset);
diff --git a/defs.h b/defs.h
index 0558d13..3431a32 100644
--- a/defs.h
+++ b/defs.h
@@ -3486,6 +3486,7 @@ struct machine_specific {
ulong CONFIG_ARM64_KERNELPACMASK;
ulong physvirt_offset;
ulong struct_page_size;
+ ulong vmemmap;
};
struct arm64_stackframe {
--
2.40.1
6 months
[Crash-utility][PATCH v3 00/10] add LoongArch64 platform support
by Ming Wang
This patch set are for Crash-utility tool, it make crash tool support on
loongarch64 architecture and the common commands(bt, p, rd, mod, log, set,
dis, and so on).
The patch sets were tested on a loongArch64 Loongson-3C5000 processor. Can
successfully enter the crash command line and support for common command.
...
KERNEL: vmlinux
DUMPFILE: /proc/kcore
CPUS: 16
DATE: Thu Jul 27 19:51:21 CST 2023
UPTIME: 06:35:11
LOAD AVERAGE: 0.15, 0.03, 0.01
TASKS: 257
NODENAME: localhost.localdomain
RELEASE: 5.10.0-60.102.0.128.oe2203.loongarch64
VERSION: #1 SMP Fri Jul 14 04:17:09 UTC 2023
MACHINE: loongarch64 (2200 Mhz)
MEMORY: 64 GB
PID: 2964
COMMAND: "crash"
TASK: 9000000098805500 [THREAD_INFO: 9000000094d48000]
CPU: 6
STATE: TASK_RUNNING (ACTIVE)
crash>
crash> dis -l start_kernel
/linux-loongarch64/init/main.c: 883
0x9000000001030818 <start_kernel>: 0x0141ee40
/linux-loongarch64/init/main.c: 879
0x900000000103081c <start_kernel+4>: 0x90000000
/linux-loongarch64/init/main.c: 883
0x9000000001030820 <start_kernel+8>: addu16i.d $zero, $t8, 8179(0x1ff3)
/linux-loongarch64/init/main.c: 879
...
About the LoongArch64 Architecture:
https://www.kernel.org/doc/html/latest/arch/loongarch/introduction.html
Changes between v2 and v3:
- Fix some compilation warnings.
- Fix build errors when without target.
- Some minor code adjustments.
Thanks and regards,
Ming
Ming Wang (10):
Add LoongArch64 framework code support
LoongArch64: Make the crash tool successfully enter the crash command
line
LoongArch64: Add 'pte' command support
LoongArch64: Add 'mach' command support
LoongArch64: Add 'bt' command support
LoongArch64: Add 'help -m/M' command support
LoongArch64: Add 'help -r' command support
LoongArch64: Add 'irq' command support
LoongArch64: Add "--kaslr" command line option support
LoongArch64: Add LoongArch64 architecture support information
Makefile | 7 +-
README | 4 +-
configure.c | 43 +-
crash.8 | 2 +-
defs.h | 164 +-
diskdump.c | 24 +-
gdb-10.2.patch | 12822 +++++++++++++++++++++++++++++++++++++++++-
help.c | 13 +-
lkcd_vmdump_v1.h | 2 +-
lkcd_vmdump_v2_v3.h | 5 +-
loongarch64.c | 1368 +++++
main.c | 3 +-
netdump.c | 27 +-
ramdump.c | 2 +
symbols.c | 33 +-
15 files changed, 14493 insertions(+), 26 deletions(-)
create mode 100644 loongarch64.c
base-commit: 53d2577cef98b76b122aade94349637a11e06138
--
2.39.2
7 months, 3 weeks
[PATCH] crash add log dmesg PRINTK_CALLER id support
by Edward Chron
From: Edward Chron <echron(a)gmail.com>
Submission to Project: crash
Component: dmesg
Files: printk.c makedumpfile.c makedumpfile.h
Code level patch applied against: 8.0.4++ - latest code pulled from
https://github.com/crash-utility/crash.git
crash Issue #164
Tested with Kernel version and makedumpfile version:
Linux Kernel Testing: Linux catalina 6.6.6 #4 SMP PREEMPT_DYNAMIC
Tue Dec 12 23:11:30 PST 2023 x86_64 GNU/Linux
Linux 5.4.264 #9 SMP
Thu Dec 21 07:00:08 PST 2023
makedumpfile Testing: makedumpfile: version 1.7.4++
(released on 6 Nov 2023)
Issue 13 for makedumpfile: adds support for
demsg PRINTK_CALLER id field
dmesg Testing: util-linux 2.39.3++
Issue 2609 for sys-utils dmesg: adds support for
dmesg PRINTK_CALLER id field to standard
dmesg kmsg interface
Add support so that dmesg entries include the optional Linux Kernel
debug CONFIG option PRINTK_CALLER which adds an optional dmesg field
that contains the Thread Id or CPU Id that is issuing the printk to
add the message to the kernel ring buffer. If enabled, this CONFIG
option makes debugging simpler as dmesg entries for a specific
thread or CPU can be recognized.
The dmesg command supports printing the PRINTK_CALLER field. The
old syslog format (dmesg -S) and recently support was added for dmesg
using /dev/kmsg interface with util-linux Issue #2609 as we upstreamed
a commit that is under review.
We've upstreamed a patch for makedumpfile that adds support for
the PRINTK_CALLER id field so it will be available with the
commands:
makedumpfile --dump-dmesg /proc/vmcore dmesgfile
makedumpfile --dump-dmesg -x vmlinux /proc/vmcore dmesgfile
The additional field provided by PRINTK_CALLER is only present
if it was configured for the Linux kernel on the running system. The
PRINTK_CALLER is a debug option and not configured by default so the
dmesg output will only change for those kernels where the option was
configured when the kernel was built. For users who went to the
trouble to configure PRINTK_CALLER and have the extra field available
for debugging, having dmesg print the field is very helpful and so
will be makedumpfile and so it would be very useful to have crash
support for dump analysis.
Size of the PRINTK_CALLER field is determined by the maximum number
tasks that can be run on the system which is limited by the value of
/proc/sys/kernel/pid_max as pid values are from 0 to value - 1.
This value determines the number of id digits needed by the caller id.
The PRINTK_CALLER field is printed as T<id> for a Task Id or C<id>
for a CPU Id for a printk in CPU context. The values are left space
padded and enclosed in parentheses such as:
[ T123] or [ C16]
Displaying the PRINTK_CALLER field in the log/dmesg record output:
-----------------------------------------------------------------
Given the layout of log/dmesg records printed by crash, for example:
crash> log -m
...
[ 0.000000] <7>e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] <6>SMBIOS 3.4.0 present.
...
[ 0.014179] <6>Secure boot disabled
[ 0.014179] <6>RAMDISK: [mem 0x3cf4f000-0x437bbfff]
...
[ 663.328848] <6>sysrq: Trigger a crash
[ 663.328859] <0>Kernel panic - not syncing: sysrq triggered crash
Our patch adds the PRINTK_CALLER field after the timestamp if the
printk_caller log / dmesg option (-P) is selected:
crash> log -m -P
...
[ 0.014179] [ T1] <6>Secure boot disabled
[ 0.014179] [ T29] <6>RAMDISK: [mem 0x3cf4f000-0x437bbfff]
...
This is consistent placement with dmesg and makedumpfile.
To produce dmesg output with the PRINTK_CALLER id included, we add
a new log / dmesg command option: -P
The PRINTK_CALLER id field is printed only if the -P option is selected.
The description of the log -P option that is seen in the help is:
crash> log help
log
dump system message buffer
[-TtdmasP]
...
...
-P Display the PRINTK_CALLER id field that identifies the thread id or
the CPU id of the task that issued the printk to add the message to
the kernel ring buffer. Displaying this field is only possible for
Linux kernels that are Linux 5.1 or newer since kernels prior to
Linux 5.1 did not provide a PRINTK_CALLER field. So, this option is
ignored for kernels older than Linux 5.1. The CONFIG_PRINTK_CALLER
kernel configuration option should be selected to make the caller_id
field available and for vmcore files your version of makedumpfile
must support dumping the caller_id field for it to be available here.
Also seen in the help file :
On systems that are properly configured to make the log caller_id field
available to the crash utility, you can select to print log records and
include the caller_id field with each log record. The log PRINTK_CALLER
id option (-P) will print either the Thread id or the CPU id depending on
the context of the process at the time the printk request was made. The
output of the thread id (begins with T) or the CPU id (begins with C) is
placed inside square brackets and is padded with leading space to keep
alignment. The caller_id field follows the timestamp field if that field
is selected:
crash> log -P
...
[ 0.014179] [ T1] Secure boot disabled
[ 0.014179] [ T29] RAMDISK: [mem 0x3cf4f000-0x437bbfff]
[ 0.198789] [ C0] DMAR: DRHD: handling fault status reg 3
...
crash> log -P -m
...
[ 0.014179] [ T1] <6>Secure boot disabled
[ 0.014179] [ T29] <6>RAMDISK: [mem 0x3cf4f000-0x437bbfff]
[ 0.198789] [ C0] <6>DMAR: DRHD: handling fault status reg 3
...
crash> log -t -P -m
...
[ T1] <6>Secure boot disabled
[ T29] <6>RAMDISK: [mem 0x3cf4f000-0x437bbfff]
[ C0] <6>DMAR: DRHD: handling fault status reg 3
...
crash> log -T -P -m
...
[Tue Dec 12 23:25:03 PST 2023] [ T1] <6>Secure boot disabled
[Tue Dec 12 23:25:03 PST 2023] [ T29] <6>RAMDISK: [mem 0x3cf4f000-0x437bbfff]
[Tue Dec 12 23:25:03 PST 2023] [ C0] <6>DMAR: DRHD: handling fault status reg 3
...
Signed-off-by: Ivan Delalande <colona(a)arista.com>
Signed-off-by: Edward Chron <echron(a)arista.com>
---
defs.h | 15 +++++++++------
help.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++--
kernel.c | 47 +++++++++++++++++++++++++++++++++++++++++++++--
printk.c | 39 +++++++++++++++++++++++++++++++++++++++
symbols.c | 2 ++
6 files changed, 150 insertions(+), 19 deletions(-)
diff --git a/defs.h b/defs.h
index 20237b7..a61e832 100644
--- a/defs.h
+++ b/defs.h
@@ -784,6 +784,7 @@ struct kernel_table { /* kernel data */
long log_len_OFFSET;
long log_text_len_OFFSET;
long log_dict_len_OFFSET;
+ ulong log_caller_id_OFFSET;
ulong phys_base_SYMBOL;
ulong _stext_SYMBOL;
} vmcoreinfo;
@@ -1943,6 +1944,7 @@ struct offset_table { /* stash of commonly-used offsets */
long log_dict_len;
long log_level;
long log_flags_level;
+ long log_caller_id;
long timekeeper_xtime_sec;
long neigh_table_hash_mask;
long sched_rt_entity_my_q;
@@ -6037,12 +6039,13 @@ void dump_log(int);
void parse_kernel_version(char *);
#define LOG_LEVEL(v) ((v) & 0x07)
-#define SHOW_LOG_LEVEL (0x1)
-#define SHOW_LOG_DICT (0x2)
-#define SHOW_LOG_TEXT (0x4)
-#define SHOW_LOG_AUDIT (0x8)
-#define SHOW_LOG_CTIME (0x10)
-#define SHOW_LOG_SAFE (0x20)
+#define SHOW_LOG_LEVEL (0x1)
+#define SHOW_LOG_DICT (0x2)
+#define SHOW_LOG_TEXT (0x4)
+#define SHOW_LOG_AUDIT (0x8)
+#define SHOW_LOG_CTIME (0x10)
+#define SHOW_LOG_SAFE (0x20)
+#define SHOW_LOG_CALLER (0x40)
void set_cpu(int);
void clear_machdep_cache(void);
struct stack_hook *gather_text_list(struct bt_info *);
diff --git a/help.c b/help.c
index cc7ab20..1de1292 100644
--- a/help.c
+++ b/help.c
@@ -4023,7 +4023,7 @@ NULL
char *help_log[] = {
"log",
"dump system message buffer",
-"[-Ttdmas]",
+"[-TtdmasP]",
" This command dumps the kernel log_buf contents in chronological order. The",
" command supports the older log_buf formats, which may or may not contain a",
" timestamp inserted prior to each message, as well as the newer variable-length",
@@ -4046,7 +4046,16 @@ char *help_log[] = {
" been copied out to the user-space audit daemon.",
" -s Dump the printk logs remaining in kernel safe per-CPU buffers that",
" have not been flushed out to log_buf.",
-" ",
+" -P Display the PRINTK_CALLER id field that identifies the thread id or",
+" the CPU id of the task that issued the printk to add the message to",
+" the kernel ring buffer. Displaying this field is only possible for",
+" Linux kernels that are Linux 5.1 or newer since kernels prior to",
+" Linux 5.1 did not provide a PRINTK_CALLER field. So, this option is",
+" ignored for kernels older than Linux 5.1. The CONFIG_PRINTK_CALLER",
+" kernel configuration option should be selected to make the caller_id",
+" field available and for vmcore files your version of makedumpfile",
+" must support dumping the caller_id field for it to be available here.",
+" ",
"\nEXAMPLES",
" Dump the kernel message buffer:\n",
" %s> log",
@@ -4214,6 +4223,41 @@ char *help_log[] = {
" CPU: 0 ADDR: ffff8ca4fbc1ad00 LEN: 0 MESSAGE_LOST: 0",
" (empty)",
" ...",
+" ",
+" On systems that are properly configured to make the log caller_id field",
+" available to the crash utility, you can select to print log records and",
+" include the caller_id field with each log record. The log PRINTK_CALLER",
+" id option (-P) will print either the Thread id or the CPU id depending on",
+" the context of the process at the time the printk request was made. The",
+" output of the thread id (begins with T) or the CPU id (begins with C) is",
+" placed inside square brackets and is padded with leading space to keep",
+" alignment. The caller_id field follows the timestamp field if that field",
+" is selected:\n",
+" %s> log -P",
+" ...",
+" [ 0.014179] [ T1] Secure boot disabled",
+" [ 0.014179] [ T29] RAMDISK: [mem 0x3cf4f000-0x437bbfff]",
+" [ 0.198789] [ C0] DMAR: DRHD: handling fault status reg 3",
+" ...",
+" %s> log -P -m",
+" ...",
+" [ 0.014179] [ T1] <6>Secure boot disabled",
+" [ 0.014179] [ T29] <6>RAMDISK: [mem 0x3cf4f000-0x437bbfff]",
+" [ 0.198789] [ C0] <6>DMAR: DRHD: handling fault status reg 3",
+" ...",
+" %s> log -t -P -m",
+" ...",
+" [ T1] <6>Secure boot disabled",
+" [ T29] <6>RAMDISK: [mem 0x3cf4f000-0x437bbfff]",
+" [ C0] <6>DMAR: DRHD: handling fault status reg 3",
+" ...",
+" %s> log -T -P -m",
+" ...",
+" [Tue Dec 12 23:25:03 PST 2023] [ T1] <6>Secure boot disabled",
+" [Tue Dec 12 23:25:03 PST 2023] [ T29] <6>RAMDISK: [mem 0x3cf4f000-0x437bbfff]",
+" [Tue Dec 12 23:25:03 PST 2023] [ C0] <6>DMAR: DRHD: handling fault status reg 3",
+" ...",
+
NULL
};
diff --git a/kernel.c b/kernel.c
index 6dcf414..0475b07 100644
--- a/kernel.c
+++ b/kernel.c
@@ -29,6 +29,9 @@
#endif
#include "bfd.h"
+#define PID_CHARS_MAX 16 /* Max Number of PID characters */
+#define PID_CHARS_DEFAULT 8 /* Default number of PID characters */
+
static void do_module_cmd(ulong, char *, ulong, char *, char *);
static void show_module_taint(void);
static char *find_module_objfile(char *, char *, char *);
@@ -5089,7 +5092,7 @@ cmd_log(void)
msg_flags = 0;
- while ((c = getopt(argcnt, args, "Ttdmas")) != EOF) {
+ while ((c = getopt(argcnt, args, "TtdmasP")) != EOF) {
switch(c)
{
case 'T':
@@ -5110,6 +5113,9 @@ cmd_log(void)
case 's':
msg_flags |= SHOW_LOG_SAFE;
break;
+ case 'P':
+ msg_flags |= SHOW_LOG_CALLER;
+ break;
default:
argerrs++;
break;
@@ -5369,6 +5375,29 @@ dump_log_entry(char *logptr, int msg_flags)
fprintf(fp, "%s", buf);
}
+ /* The PRINTK_CALLER id field was introduced with Linux-5.1 so if
+ * requested, Kernel version >= 5.1 and field exists print caller_id.
+ */
+ if (msg_flags & SHOW_LOG_CALLER &&
+ kt->kernel_version[0] >= 5 &&
+ kt->kernel_version[1] >= 1 &&
+ VALID_MEMBER(log_caller_id)) {
+ const unsigned int cpuid = 0x80000000;
+ char cidbuf[PID_CHARS_MAX];
+ unsigned int pkc;
+ char idtype;
+
+ /* Get id type, isolate id value in pkc for print */
+ pkc = UINT(logptr + OFFSET(log_caller_id));
+ idtype = (pkc & cpuid) ? 'C' : 'T';
+ pkc &= ~cpuid;
+ sprintf(cidbuf, "%c%d", idtype, pkc);
+ sprintf(buf, "[%*s] ", PID_CHARS_DEFAULT, cidbuf);
+
+ ilen += strlen(buf);
+ fprintf(fp, "%s", buf);
+ }
+
level = LOG_LEVEL(level);
if (msg_flags & SHOW_LOG_LEVEL) {
@@ -5424,8 +5453,13 @@ dump_variable_length_record_log(int msg_flags)
* from log to printk_log. See 62e32ac3505a0cab.
*/
log_struct_name = "printk_log";
- } else
+ if (MEMBER_EXISTS("printk_log", "caller_id"))
+ MEMBER_OFFSET_INIT(log_caller_id, "printk_log",
+ "caller_id");
+ } else {
log_struct_name = "log";
+ INVALID_MEMBER(log_caller_id);
+ }
STRUCT_SIZE_INIT(log, log_struct_name);
MEMBER_OFFSET_INIT(log_ts_nsec, log_struct_name, "ts_nsec");
@@ -11132,6 +11166,15 @@ get_log_from_vmcoreinfo(char *file)
vmc->log_dict_len_OFFSET);
free(string);
}
+ /* The caller_id field exists only in printk_log if kernel >= 5.1
+ * and if CONFIG_PRINTK_CALLER was set in the kernel config file*/
+ if ((string = pc->read_vmcoreinfo("OFFSET(printk_log.caller_id"))) {
+ vmc->log_dict_len_OFFSET = dtol(string, RETURN_ON_ERROR, NULL);
+ if (CRASHDEBUG(1))
+ fprintf(fp, "OFFSET(printk_log.caller_id): %ld\n",
+ vmc->log_caller_id_OFFSET);
+ free(string);
+ }
if ((string = pc->read_vmcoreinfo("SIZE(log)"))) {
vmc->log_SIZE = dtol(string, RETURN_ON_ERROR, NULL);
if (CRASHDEBUG(1))
diff --git a/printk.c b/printk.c
index 8658016..d1b3f40 100644
--- a/printk.c
+++ b/printk.c
@@ -9,6 +9,7 @@ struct prb_map {
unsigned long desc_ring_count;
char *descs;
char *infos;
+ unsigned int pid_max_chars;
char *text_data_ring;
unsigned long text_data_ring_size;
@@ -37,6 +38,9 @@ enum desc_state {
#define DESC_ID_MASK (~DESC_FLAGS_MASK)
#define DESC_ID(sv) ((sv) & DESC_ID_MASK)
+#define PID_CHARS_MAX 16 /* Max Number of PID characters */
+#define PID_CHARS_DEFAULT 8 /* Default number of PID characters */
+
/*
* get_desc_state() taken from kernel source:
*
@@ -162,6 +166,27 @@ dump_record(struct prb_map *m, unsigned long id, int msg_flags)
fprintf(fp, "%s", buf);
}
+ /*
+ * The lockless ringbuffer introduced in Linux-5.10 always has
+ * the caller_id field available, so if requested, print it.
+ */
+ if (msg_flags & SHOW_LOG_CALLER) {
+ const unsigned int cpuid = 0x80000000;
+ char cidbuf[PID_CHARS_MAX];
+ unsigned int pkc;
+ char idtype;
+
+ /* Get id type, isolate id value in pkc for print */
+ pkc = UINT(info + OFFSET(printk_info_caller_id));
+ idtype = (pkc & cpuid) ? 'C' : 'T';
+ pkc &= ~cpuid;
+ sprintf(cidbuf, "%c%d", idtype, pkc);
+ sprintf(buf, "[%*s] ", PID_CHARS_DEFAULT, cidbuf);
+
+ ilen += strlen(buf);
+ fprintf(fp, "%s", buf);
+ }
+
if (msg_flags & SHOW_LOG_LEVEL) {
level = UCHAR(info + OFFSET(printk_info_level)) >> 5;
sprintf(buf, "<%x>", level);
@@ -262,6 +287,20 @@ dump_lockless_record_log(int msg_flags)
goto out_text_data;
}
+ /* Get pid_max and fill it in if we need it */
+ if (msg_flags & SHOW_LOG_CALLER) {
+ char pid_chars[PID_CHARS_MAX];
+ size_t pc_size = sizeof(pid_chars);
+ size_t pid_chars_length;
+ unsigned int pid_max;
+
+ get_symbol_data("pid_max", sizeof(pid_max), &pid_max);
+ pid_chars_length = snprintf(pid_chars, pc_size, "%u", &pid_max);
+ m.pid_max_chars = pid_chars_length + 1;
+ } else {
+ m.pid_max_chars = PID_CHARS_DEFAULT;
+ }
+
/* ready to go */
tail_id = ULONG(m.desc_ring + OFFSET(prb_desc_ring_tail_id) +
diff --git a/symbols.c b/symbols.c
index 5d91991..7969409 100644
--- a/symbols.c
+++ b/symbols.c
@@ -11521,6 +11521,8 @@ dump_offset_table(char *spec, ulong makestruct)
OFFSET(log_level));
fprintf(fp, " log_flags_level: %ld\n",
OFFSET(log_flags_level));
+ fprintf(fp, " log_caller_id: %ld\n",
+ OFFSET(log_caller_id));
fprintf(fp, " printk_info_seq: %ld\n", OFFSET(printk_info_seq));
fprintf(fp, " printk_info_ts_nseq: %ld\n", OFFSET(printk_info_ts_nsec));
--
2.43.0
7 months, 3 weeks
[PATCH] Fix for "bt pid" command not printing enough stack trace
by Lianbo Jiang
Currently, the "bt pid" command may not print enough stack trace and the
remaining frames will be truncated on x86_64. For example:
Without the patch:
crash> bt 493113
PID: 493113 TASK: ff2e34ecbd3ca2c0 CPU: 27 COMMAND: "sriov_fec_daemo"
#0 [ff77abc4e81cfb08] __schedule at ffffffff81b239cb
#1 [ff77abc4e81cfb70] schedule at ffffffff81b23e2d
#2 [ff77abc4e81cfb88] schedule_timeout at ffffffff81b2c9e8
RIP: 000000000047cdbb RSP: 000000c0000975a8 RFLAGS: 00000216
RAX: ffffffffffffffda RBX: 000000c00004e000 RCX: 000000000047cdbb
RDX: 000000000000000c RSI: 000000c000097798 RDI: 0000000000000009
RBP: 000000c0000975f8 R8: 0000000000000001 R9: 000000c00098d680
R10: 000000000000000c R11: 0000000000000216 R12: 000000c000097688
R13: 0000000000000000 R14: 000000c0006c3520 R15: 00007f5e359946b7
ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b
With the patch:
crash> bt 493113
PID: 493113 TASK: ff2e34ecbd3ca2c0 CPU: 27 COMMAND: "sriov_fec_daemo"
#0 [ff77abc4e81cfb08] __schedule at ffffffff81b239cb
#1 [ff77abc4e81cfb70] schedule at ffffffff81b23e2d
#2 [ff77abc4e81cfb88] schedule_timeout at ffffffff81b2c9e8
#3 [ff77abc4e81cfc68] vfio_unregister_group_dev at ffffffffc10e76ae [vfio]
#4 [ff77abc4e81cfca8] vfio_pci_core_unregister_device at ffffffffc11bb599 [vfio_pci_core]
#5 [ff77abc4e81cfcc0] vfio_pci_remove at ffffffffc103e045 [vfio_pci]
#6 [ff77abc4e81cfcd0] pci_device_remove at ffffffff815d7513
#7 [ff77abc4e81cfcf0] device_release_driver_internal at ffffffff81708baa
#8 [ff77abc4e81cfd20] unbind_store at ffffffff81705f6f
#9 [ff77abc4e81cfd50] kernfs_fop_write_iter at ffffffff81454bf1
#10 [ff77abc4e81cfd88] new_sync_write at ffffffff813aad8c
#11 [ff77abc4e81cfe20] vfs_write at ffffffff813adb36
#12 [ff77abc4e81cfe58] ksys_write at ffffffff813adeb2
#13 [ff77abc4e81cfe90] do_syscall_64 at ffffffff81b17159
#14 [ff77abc4e81cff50] entry_SYSCALL_64_after_hwframe at ffffffff81c0009b
RIP: 000000000047cdbb RSP: 000000c0000975a8 RFLAGS: 00000216
RAX: ffffffffffffffda RBX: 000000c00004e000 RCX: 000000000047cdbb
RDX: 000000000000000c RSI: 000000c000097798 RDI: 0000000000000009
RBP: 000000c0000975f8 R8: 0000000000000001 R9: 000000c00098d680
R10: 000000000000000c R11: 0000000000000216 R12: 000000c000097688
R13: 0000000000000000 R14: 000000c0006c3520 R15: 00007f5e359946b7
ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b
Let's add a check function that jump to schedule_timeout(), just like
the schedule_timeout_*() in x86_64_function_called_by().
Signed-off-by: Lianbo Jiang <lijiang(a)redhat.com>
---
x86_64.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/x86_64.c b/x86_64.c
index 42ade4817ad9..16850d98dc2d 100644
--- a/x86_64.c
+++ b/x86_64.c
@@ -4487,7 +4487,8 @@ x86_64_function_called_by(ulong rip)
*/
if (sp) {
if ((STREQ(sp->name, "schedule_timeout_interruptible") ||
- STREQ(sp->name, "schedule_timeout_uninterruptible")))
+ STREQ(sp->name, "schedule_timeout_uninterruptible") ||
+ STREQ(sp->name, "wait_for_completion_interruptible_timeout")))
sp = symbol_search("schedule_timeout");
if (STREQ(sp->name, "__cond_resched"))
--
2.41.0
8 months
[PATCH 0/3] RISCV64: enhance bt command
by Song Shuai
hi,
This series enhances the bt command for RISCV64 by making bt aware of
- possible kernel and user exception frames (bt -e)
- per-cpu IRQ stacks (bt for vmcore crashed in irq stack, bt -E)
- per-cpu overflow stacks (bt for vmcore caused by kernel stack overflow)
This series is based on the "RISCV64: Fix 'bt' output when no ra on
the stack top" patch sent a few days ago. You can get them all from my Github repo:
https://github.com/sugarfillet/crash/commits/rv64-bt-enhance/
The detailed test report can be found in each patch's commit-msg and
all these tests passed on the RV64 Qemu-virt and with RISC-V Linux v6.6.
Here is the abstract of these three patches:
Patch1 :
[Crash-utility] RISCV64: Add support for 'bt -e' option
With this patch we can search the stack for possible kernel and user
mode exception frames via 'bt -e' command.
Patch2 :
[Crash-utility] RISCV64: Add per-cpu IRQ stacks support
This patch introduces per-cpu IRQ stacks for RISCV64 to let
"bt" do backtrace on it and 'bt -E' search eframes on it,
and the 'help -m' command displays the addresses of each
per-cpu IRQ stack.
Patch3:
[Crash-utility] RISCV64: Add per-cpu overflow stacks support
The patch introduces per-cpu overflow stacks for RISCV64 to let
"bt" do backtrace on it and the 'help -m' command dispalys the
addresss of each per-cpu overflow stack.
Song Shuai (3):
[Crash-utility] RISCV64: Add support for 'bt -e' option
[Crash-utility] RISCV64: Add per-cpu IRQ stacks support
[Crash-utility] RISCV64: Add per-cpu overflow stacks support
defs.h | 30 +++-
help.c | 2 +-
riscv64.c | 492 +++++++++++++++++++++++++++++++++++++++++++++++++++---
3 files changed, 494 insertions(+), 30 deletions(-)
--
2.20.1
8 months, 1 week
[PATCH v5 0/5] Improve stack unwind on ppc64
by Aditya Gupta
The Problem:
============
Currently crash is unable to show function arguments and local variables, as
gdb can do. And functionality for moving between frames ('up'/'down') is not
working in crash.
Crash has 'gdb passthroughs' for things gdb can do, but the gdb passthroughs
'bt', 'frame', 'info locals', 'up', 'down' are not working either, due to
gdb not getting the register values from `crash_target::fetch_registers`,
which then uses `machdep->get_cpu_reg`, which is not implemented for PPC64
Proposed Solution:
==================
Fix the gdb passthroughs by implementing "machdep->get_cpu_reg" for PPC64.
This way, "gdb mode in crash" will support this feature for both ELF and
kdump-compressed vmcore formats, while "gdb" would only have supported ELF
format
This way other features of 'gdb', such as seeing
backtraces/registers/variables/arguments/local variables, moving up and
down stack frames, can be used with any ppc64 vmcore, irrespective of
being ELF format or kdump-compressed format.
Note: This doesn't support live debugging on ppc64, since registers are not
available to be read
Implications on Architectures:
====================================
No architecture other than PPC64 has been affected, other than in case of
'frame' command
As mentioned in patch #2, since frame will not be prohibited, so it will print:
crash> frame
#0 <unavailable> in ?? ()
Instead of before prohibited message:
crash> frame
crash: prohibited gdb command: frame
Major change will be in 'gdb mode' on PPC64, that it will print the frames, and
local variables, instead of failing with errors showing no frame, or showing
that couldn't get PC, it will be able to give all this information.
Testing:
========
Git tree with this patch series applied:
https://github.com/adi-g15-ibm/crash/tree/stack-unwind-v5-smaller-gran
To test various gdb passthroughs:
(crash) set
(crash) set gdb on
gdb> thread
gdb> bt
gdb> info threads
gdb> info threads
gdb> info locals
gdb> info variables irq_rover_lock
gdb> info args
gdb> thread 2
gdb> set gdb off
(crash) set
(crash) set -c 6
(crash) gdb thread
(crash) bt
(crash) gdb bt
(crash) frame
(crash) up
(crash) down
(crash) info locals
Known Issues:
=============
1. In gdb mode, 'bt' might fail to show backtrace in few vmcores collected
from older kernels. This is a known issue due to register mismatch, and
its fix has been merged upstream:
This can also cause some 'invalid kernel virtual address' errors during gdb
unwinding the stack registers
Commit: https://github.com/torvalds/linux/commit/b684c09f09e7a6af3794d4233ef78581...
Fixing GDB passthroughs on other architectures
==============================================
Much of the work for making gdb passthroughs like 'gdb bt', 'gdb
thread', 'gdb info locals' etc. has been done by the patches introducing
'machdep->get_cpu_reg' and this series fixing some issues in that.
Other architectures should be able to fix these gdb functionalities by
simply implementing 'machdep->get_cpu_reg (cpu, regno, ...)'.
The reasoning behind that has been explained with a diagram in commit
description of patch #1
I will assist with my findings/observations fixing it on ppc64 whenever needed.
Changelog:
==========
V5:
+ changes in patch #1: made ppc64_get_cpu_reg static, and remove unreachable
code
+ changes in patch #3: fixed typo 'ppc64_renum' instead of 'ppc64_regnum',
remove unneeded if condition
+ changes in patch #5: implement refresh regcache on per thread, instead of all
threads at once
V4:
+ fix segmentation fault in live debugging (change in patch #1)
+ mention live debugging not supported in cover letter and patch #1
+ fixed some checkpatch warnings (change in patch #5)
V3:
+ default gdb thread will be the crashing thread, instead of being
thread '0'
+ synchronise crash cpu and gdb thread context
+ fix bug in gdb_interface, that replaced gdb's output stream, losing
output in some cases, such as info threads and extra output in info
variables
+ fix 'info threads'
RFC V2:
- removed patch implementing 'frame', 'up', 'down' in crash
- updated the cover letter by removing the mention of those commands other
than the respective gdb passthrough
Aditya Gupta (5):
ppc64: correct gdb passthroughs by implementing machdep->get_cpu_reg
remove 'frame' from prohibited commands list
synchronise cpu context changes between crash/gdb
fix gdb_interface: restore gdb's output streams at end of
gdb_interface
fix 'info threads' command
crash_target.c | 44 ++++++++++++++++
defs.h | 130 +++++++++++++++++++++++++++++++++++++++++++++++-
gdb-10.2.patch | 110 +++++++++++++++++++++++++++++++++++++++-
gdb_interface.c | 2 +-
kernel.c | 47 +++++++++++++++--
ppc64.c | 95 +++++++++++++++++++++++++++++++++--
task.c | 14 ++++++
tools.c | 2 +-
8 files changed, 434 insertions(+), 10 deletions(-)
--
2.41.0
8 months, 2 weeks
Re: [PATCH 0/3] RISCV64: enhance bt command
by Lianbo Jiang
Hi, Song
On 12/14/23 13:07, devel-request(a)lists.crash-utility.osci.io wrote:
> Date: Wed, 13 Dec 2023 17:45:05 +0800
> From: Song Shuai<songshuaishuai(a)tinylab.org>
> Subject: [Crash-utility] [PATCH 0/3] RISCV64: enhance bt command
> To:k-hagio-ab@nec.com,xianting.tian@linux.alibaba.com
> Cc:devel@lists.crash-utility.osci.io, Song Shuai
> <songshuaishuai(a)tinylab.org>
> Message-ID:<20231213094508.693236-1-songshuaishuai(a)tinylab.org>
>
> hi,
>
> This series enhances the bt command for RISCV64 by making bt aware of
> - possible kernel and user exception frames (bt -e)
> - per-cpu IRQ stacks (bt for vmcore crashed in irq stack, bt -E)
> - per-cpu overflow stacks (bt for vmcore caused by kernel stack overflow)
>
> This series is based on the "RISCV64: Fix 'bt' output when no ra on
> the stack top" patch sent a few days ago. You can get them all from my Github repo:
>
> https://github.com/sugarfillet/crash/commits/rv64-bt-enhance/
Could you please provide the patched kexec-tools(link) for riscv64?(if
possible, please give the test steps)
It can help me to do some tests quickly.
Thanks.
Lianbo
>
> The detailed test report can be found in each patch's commit-msg and
> all these tests passed on the RV64 Qemu-virt and with RISC-V Linux v6.6.
>
> Here is the abstract of these three patches:
>
> Patch1 :
> [Crash-utility] RISCV64: Add support for 'bt -e' option
>
> With this patch we can search the stack for possible kernel and user
> mode exception frames via 'bt -e' command.
>
> Patch2 :
> [Crash-utility] RISCV64: Add per-cpu IRQ stacks support
>
> This patch introduces per-cpu IRQ stacks for RISCV64 to let
> "bt" do backtrace on it and 'bt -E' search eframes on it,
> and the 'help -m' command displays the addresses of each
> per-cpu IRQ stack.
>
> Patch3:
> [Crash-utility] RISCV64: Add per-cpu overflow stacks support
>
> The patch introduces per-cpu overflow stacks for RISCV64 to let
> "bt" do backtrace on it and the 'help -m' command dispalys the
> addresss of each per-cpu overflow stack.
>
> Song Shuai (3):
> [Crash-utility] RISCV64: Add support for 'bt -e' option
> [Crash-utility] RISCV64: Add per-cpu IRQ stacks support
> [Crash-utility] RISCV64: Add per-cpu overflow stacks support
>
> defs.h | 30 +++-
> help.c | 2 +-
> riscv64.c | 492 +++++++++++++++++++++++++++++++++++++++++++++++++++---
> 3 files changed, 494 insertions(+), 30 deletions(-)
>
> -- 2.20.1
8 months, 2 weeks
[PATCH v2] arm64: support ramdump for HW Tag-Based KASAN(MTE) mode
by qiwu.chen＠transsion.com
Kernel commit 2e903b914797("kasan, arm64: implement HW_TAGS runtime")
introduce a Hardware Tag-Based KASAN(MTE) mode for ARMv8.5 later CPUs,
which uses the Top Byte Ignore (TBI) feature of arm64 CPUs to store a
pointer tag in the top byte of kernel pointers.
Currently, crash utility cannot load MTE ramdump due to access the invalid
HW Tag-Based kvaddr. Here's the example error message:
please wait... (gathering kmem slab cache data)
crash: invalid kernel virtual address: f1ffff80c000201c type: "kmem_cache objsize/object_size"
please wait... (gathering task table data)
crash: invalid kernel virtual address: f9ffff8239c2cde0 type: "xa_node shift"
This patch replace the orignal generic_is_kvaddr() with arm64_is_kvaddr(),
which check the validity for a HW Tag-Based kvaddr. mte_tag_reset() is
used to convert a Tag-Based kvaddr to untaggged kvaddr in arm64_VTOP()
and arm64_IS_VMALLOC_ADDR().
---
changes in v2:
- Introduce a new flag (ARM64_MTE) and initialize it on PRE_SYMTAB stage.
- Create this patch based on latest tag.
Signed-off-by: chenqiwu <qiwu.chen(a)transsion.com>
---
arm64.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++----
defs.h | 1 +
2 files changed, 47 insertions(+), 4 deletions(-)
diff --git a/arm64.c b/arm64.c
index 57965c6..ba1a4f5 100644
--- a/arm64.c
+++ b/arm64.c
@@ -102,6 +102,41 @@ struct kernel_range {
static struct kernel_range *arm64_get_va_range(struct machine_specific *ms);
static void arm64_get_struct_page_size(struct machine_specific *ms);
+typedef unsigned char u8;
+/* mte tag shift bit */
+#define MTE_TAG_SHIFT 56
+/* native kernel pointers tag */
+#define KASAN_TAG_KERNEL 0xFF
+/* minimum value for random tags */
+#define KASAN_TAG_MIN 0xF0
+/* right shift the tag to MTE_TAG_SHIFT bit */
+#define mte_tag_shifted(tag) ((ulong)(tag) << MTE_TAG_SHIFT)
+/* get the top byte value of the original kvaddr */
+#define mte_tag_get(addr) (u8)((ulong)(addr) >> MTE_TAG_SHIFT)
+/* reset the top byte to get an untaggged kvaddr */
+#define mte_tag_reset(addr) ((ulong)addr & ~mte_tag_shifted(KASAN_TAG_KERNEL) | mte_tag_shifted(KASAN_TAG_KERNEL))
+
+static inline bool is_mte_kvaddr(ulong addr)
+{
+ /* check for ARM64_MTE enabled */
+ if (machdep->flags & ARM64_MTE)
+ return false;
+
+ /* check the validity of HW Tag-Based kvaddr */
+ if (mte_tag_get(addr) >= KASAN_TAG_MIN && mte_tag_get(addr) < KASAN_TAG_KERNEL)
+ return true;
+
+ return false;
+}
+
+static int arm64_is_kvaddr(ulong addr)
+{
+ if (is_mte_kvaddr(addr))
+ return (mte_tag_reset(addr) >= (ulong)(machdep->kvbase));
+
+ return (addr >= (ulong)(machdep->kvbase));
+}
+
static void arm64_calc_kernel_start(void)
{
struct machine_specific *ms = machdep->machspec;
@@ -146,7 +181,8 @@ arm64_init(int when)
if (machdep->cmdline_args[0])
arm64_parse_cmdline_args();
machdep->flags |= MACHDEP_BT_TEXT;
-
+ if (symbol_exists("cpu_enable_mte"))
+ machdep->flags |= ARM64_MTE;
ms = machdep->machspec;
/*
@@ -262,7 +298,7 @@ arm64_init(int when)
machdep->kvbase = ARM64_VA_START;
ms->userspace_top = ARM64_USERSPACE_TOP;
}
- machdep->is_kvaddr = generic_is_kvaddr;
+ machdep->is_kvaddr = arm64_is_kvaddr;
machdep->kvtop = arm64_kvtop;
/* The defaults */
@@ -1023,7 +1059,7 @@ arm64_dump_machdep_table(ulong arg)
fprintf(fp, " dis_filter: arm64_dis_filter()\n");
fprintf(fp, " cmd_mach: arm64_cmd_mach()\n");
fprintf(fp, " get_smp_cpus: arm64_get_smp_cpus()\n");
- fprintf(fp, " is_kvaddr: generic_is_kvaddr()\n");
+ fprintf(fp, " is_kvaddr: arm64_is_kvaddr()\n");
fprintf(fp, " is_uvaddr: arm64_is_uvaddr()\n");
fprintf(fp, " value_to_symbol: generic_machdep_value_to_symbol()\n");
fprintf(fp, " init_kernel_pgd: arm64_init_kernel_pgd\n");
@@ -1633,6 +1669,9 @@ ulong arm64_PTOV(ulong paddr)
ulong
arm64_VTOP(ulong addr)
{
+ if (is_mte_kvaddr(addr))
+ addr = mte_tag_reset(addr);
+
if (machdep->flags & NEW_VMEMMAP) {
if (machdep->machspec->VA_START &&
(addr >= machdep->machspec->kimage_text) &&
@@ -4562,7 +4601,10 @@ int
arm64_IS_VMALLOC_ADDR(ulong vaddr)
{
struct machine_specific *ms = machdep->machspec;
-
+
+ if (is_mte_kvaddr(vaddr))
+ vaddr = mte_tag_reset(vaddr);
+
if ((machdep->flags & NEW_VMEMMAP) &&
(vaddr >= machdep->machspec->kimage_text) &&
(vaddr <= machdep->machspec->kimage_end))
diff --git a/defs.h b/defs.h
index 20237b7..aa8eba8 100644
--- a/defs.h
+++ b/defs.h
@@ -3348,6 +3348,7 @@ typedef signed int s32;
#define FLIPPED_VM (0x400)
#define HAS_PHYSVIRT_OFFSET (0x800)
#define OVERFLOW_STACKS (0x1000)
+#define ARM64_MTE (0x2000)
/*
* Get kimage_voffset from /dev/crash
--
2.25.1
8 months, 3 weeks
Re: [PATCH] x86_64: check bt->bptr before calculate framesize
by Lianbo Jiang
On 12/26/23 14:43, devel-request(a)lists.crash-utility.osci.io wrote:
> Date: Tue, 26 Dec 2023 06:42:55 +0000
> From: HAGIO KAZUHITO(萩尾 一仁)<k-hagio-ab(a)nec.com>
> Subject: [Crash-utility] Re: [PATCH] x86_64: check bt->bptr before
> calculate framesize
> To: Tao Liu<ltao(a)redhat.com>,"devel(a)lists.crash-utility.osci.io"
> <devel(a)lists.crash-utility.osci.io>
> Message-ID:<58d63b19-0d8a-3be0-234a-703a4c25dcb9(a)nec.com>
> Content-Type: text/plain; charset="utf-8"
>
> On 2023/12/26 10:19, Tao Liu wrote:
>> Previously the value of bt->bptr is not checked, which may led to a
>> wrong prev_sp and framesize. As a result, bt->stackbuf[] will be
>> accessed out of range, and segfault.
>>
>> Before:
>> crash> set debug 1
>> crash> bt
>> ...snip...
>> --- <NMI exception stack> ---
>> #8 [ffffffff9a603e10] __switch_to_asm at ffffffff99800214
>> rsp: ffffffff9a603e10 textaddr: ffffffff99800214 -> spo: 0 bpo: 0 spr: 0 bpr: 0 type: 0 end: 0
>> #9 [ffffffff9a603e40] __schedule at ffffffff9960dfb1
>> rsp: ffffffff9a603e40 textaddr: ffffffff9960dfb1 -> spo: 16 bpo: -16 spr: 4 bpr: 1 type: 0 end: 0
>> rsp: ffffffff9a603e40 rbp: ffffb9ca076e7ca8 prev_sp: ffffb9ca076e7cb8 framesize: 1829650024
>> Segmentation fault (core dumped)
>>
>> (gdb) p/x bt->stackbase
>> $1 = 0xffffffff9a600000
>> (gdb) p/x bt->stacktop
>> $2 = 0xffffffff9a604000
>>
>> After:
>> crash> set debug 1
>> crash> bt
>> ...snip...
>> --- <NMI exception stack> ---
>> #8 [ffffffff9a603e10] __switch_to_asm at ffffffff99800214
>> rsp: ffffffff9a603e10 textaddr: ffffffff99800214 -> spo: 0 bpo: 0 spr: 0 bpr: 0 type: 0 end: 0
>> #9 [ffffffff9a603e40] __schedule at ffffffff9960dfb1
>> rsp: ffffffff9a603e40 textaddr: ffffffff9960dfb1 -> spo: 16 bpo: -16 spr: 4 bpr: 1 type: 0 end: 0
>> #10 [ffffffff9a603e98] schedule_idle at ffffffff9960e87c
>> rsp: ffffffff9a603e98 textaddr: ffffffff9960e87c -> spo: 8 bpo: 0 spr: 5 bpr: 0 type: 0 end: 0
>> rsp: ffffffff9a603e98 prev_sp: ffffffff9a603ea8 framesize: 0
>> ...snip...
>>
>> This patch will check bt->bptr value before calculate framesize. Only bt->bptr
>> falls into the range of bt->stackbase and bt->stacktop will be
>> regarded as valid.
>>
>> Signed-off-by: Tao Liu<ltao(a)redhat.com>
>> ---
>> x86_64.c | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/x86_64.c b/x86_64.c
>> index 8abe39d..ff1ba6e 100644
>> --- a/x86_64.c
>> +++ b/x86_64.c
>> @@ -8707,7 +8707,8 @@ x86_64_get_framesize(struct bt_info *bt, ulong textaddr, ulong rsp, char *stack_
>> if (CRASHDEBUG(1))
>> fprintf(fp, "rsp: %lx prev_sp: %lx framesize: %d\n",
>> rsp, prev_sp, framesize);
>> - } else if ((korc->sp_reg == ORC_REG_BP) && bt->bptr) {
>> + } else if ((korc->sp_reg == ORC_REG_BP) && bt->bptr &&
>> + bt->bptr >= bt->stackbase && bt->bptr <= bt->stacktop) {
> Thank you for looking into this! Looks good to me.
>
> Just a nit, INSTACK() can be used?
The INSTACK(bt->bptr, bt) is better, let's go with this, Kazu. Tao is on
PTO.
For the patch with the above change: Ack
Thanks.
Lianbo
>
> Thanks,
> Kazu
>
>
>> prev_sp = bt->bptr + korc->sp_offset;
>> framesize = (prev_sp - (rsp + 8) - 8);
>> if (CRASHDEBUG(1))
8 months, 3 weeks
[Crash-utility][RESEND PATCH v2 00/10] add LoongArch64 platform support
by Ming Wang
Changes between v1 and v2:
- Simplified the LoongArch64 gdb's backport patch and appended it to the gdb-10.2.patch.
- Add building the loongarch crash binary on an X86 64 host support.
- Fix offset_table format issues.
- Move private definitions code to loongarch64.c.
This patch set are for Crash-utility tool, it make crash tool support on
loongarch64 architecture and the common commands(bt, p, rd, mod, log, set,
dis, and so on).
The patch sets were tested on a loongArch64 Loongson-3C5000 processor. Can
successfully enter the crash command line and support for common command.
...
KERNEL: vmlinux
DUMPFILE: /proc/kcore
CPUS: 16
DATE: Thu Jul 27 19:51:21 CST 2023
UPTIME: 06:35:11
LOAD AVERAGE: 0.15, 0.03, 0.01
TASKS: 257
NODENAME: localhost.localdomain
RELEASE: 5.10.0-60.102.0.128.oe2203.loongarch64
VERSION: #1 SMP Fri Jul 14 04:17:09 UTC 2023
MACHINE: loongarch64 (2200 Mhz)
MEMORY: 64 GB
PID: 2964
COMMAND: "crash"
TASK: 9000000098805500 [THREAD_INFO: 9000000094d48000]
CPU: 6
STATE: TASK_RUNNING (ACTIVE)
crash>
crash> dis -l start_kernel
/linux-loongarch64/init/main.c: 883
0x9000000001030818 <start_kernel>: 0x0141ee40
/linux-loongarch64/init/main.c: 879
0x900000000103081c <start_kernel+4>: 0x90000000
/linux-loongarch64/init/main.c: 883
0x9000000001030820 <start_kernel+8>: addu16i.d $zero, $t8, 8179(0x1ff3)
/linux-loongarch64/init/main.c: 879
...
About the LoongArch64 Architecture:
https://www.kernel.org/doc/html/latest/loongarch/index.html
Thanks and regards,
Ming
Ming Wang (10):
Add LoongArch64 framework code support
LoongArch64: Make the crash tool successfully enter the crash command
line
LoongArch64: Add 'pte' command support
LoongArch64: Add 'mach' command support
LoongArch64: Add 'bt' command support
LoongArch64: Add 'help -m/M' command support
LoongArch64: Add 'help -r' command support
LoongArch64: Add 'irq' command support
LoongArch64: Add "--kaslr" command line option support
LoongArch64: Add LoongArch64 architecture support information
Makefile | 7 +-
README | 4 +-
configure.c | 39 +-
crash.8 | 2 +-
defs.h | 164 +-
diskdump.c | 24 +-
gdb-10.2.patch | 12818 ++++++++++++++++++++++++++++++++++++++++++
help.c | 13 +-
lkcd_vmdump_v1.h | 2 +-
lkcd_vmdump_v2_v3.h | 5 +-
loongarch64.c | 1366 +++++
main.c | 3 +-
netdump.c | 27 +-
ramdump.c | 2 +
symbols.c | 33 +-
15 files changed, 14484 insertions(+), 25 deletions(-)
create mode 100644 loongarch64.c
base-commit: 55a43bcefa20161c7e56ed0e309e90e941f47efc
--
2.39.2
8 months, 3 weeks